Sam4s SAP-630FT, Manual

Page: 112 / 271

112
•
Program Mode Sam4POS 6600/4800II Program Manual v2.1
NOT USED, CASH, CHECK, FOOD STAMP TENDER, and MISC.
Note: If the Paid Type is set for TENDER and the Tender Category is set for MISC, you can use this
key for easy TIP entry.
List Sale Interrupt
Allows the operator to list previously interrupted transactions, when the Clerk Interrupt Feature is used. A
specific transaction can be selected to preview. We can filter the list to view just No Sale or Cancel
transactions.
GENERAL
Manager Required? – Operation requires input of manager password to complete operation.
List Table
Touch LIST TABLE to display a list of all open soft checks in the file. We can create separate List Table keys
for each tracking file, Phone Orders, Take Out, Eat-In, etc.
GENERAL
Manager Required? – Operation requires input of manager password to complete operation.
OPTION
Select to view ALL checks or select which tracking file (Recall Check key) to view. You can create
multiple List Check keys to be used with each Recall Check key.
Log Backup
Backs up the Log Data to a USB or SD Card or to an FTP site.
OPTION
Log Backup Type – Select USB, FTP, or INTERNAL STORAGE.
With Database – check this option if you want the Log Backup to include the Database.
USB
USB PATH – You can create a custom description for this selection.
INTERNAL STORAGE
SDCARD PATH – You can create a custom description for this selection.
FTP
FTP IP – Enter the IP address of the site where you want to send backup information. FTP
Port – Enter the appropriate FTP port number.
Modifier
Preceding a PLU entry, a modifier key changes a digit of the PLU number, causing a different PLU to be
registered; commonly used for registering Small/Medium/Large item selections. Modifier keys can be set to
affect any digit position of the PLU
(1-18) to any specified digit value (0-9).
GENERAL
Manager Required? – Operation requires input of manager password to complete operation.
MODIFIER
Print Descriptor On Guest Check –
Print Descriptor On Receipt –
Print Descriptor On KP –
Affect Digit – Enter the digit position of the PLU number (1-18) you wish to be changed when using
this key.
Affect Value – Enter the value (0-9) to replace the selected affect digit position selected. For example;
if you wish to affect PLU digit #4 with a value of 1, then pressing this modifier key prior to registering
PLU# 17 will result in the registration of PLU# 1017.