Sam4s SAP-630FT Manual Download Page 192

Page: 192 / 271

190

•

Program Mode

Sam4POS 6600/4800II Program Manual v2.1

EDIT –

Allows changes to the printer and time period selections.

DELETE –

Will delete the selected device assignment.

Device Mapping Settings

Printer:

Input a

DESCRIPTION

for the device (up to 30

characters).

SELECT DEVICE:

from the list of available

devices as set in the Device Setting screens.

SELECT FROM TERMINAL:

chose the

terminal where the device is connected.

SELECT DEVICE USING TYPE:

Select the

type for the specified device. Example, for
printers choose from the selections: Receipt, KP,
Journal, Slip, and Label.

SELECT BACKUP DEVICE:

set if you wish

to define a backup device in the case the main
device is offline.

SELECT BACKUP TERMINAL:

select the

terminal where the backup device is connected.

Scanner:

Input a

DESCRIPTION

for the device (up to 30

characters).

SELECT DEVICE:

from the list of available

devices as set in the Device Setting screens.

Line Display:

Input a

DESCRIPTION

for the device (up to

30 characters).

SELECT DEVICE:

from the list of available

devices as set in the Device Setting screens.

Scale:

Input a

DESCRIPTION

for the device (up to

30 characters).

SELECT DEVICE:

from the list of available

devices as set in the Device Setting screens.

EFT:

Input a

DESCRIPTION

for the device (up to

30 characters).

SELECT DEVICE:

from the list of available

devices as set in the Device Setting screens.

Summary of Contents for SAP-630FT
















































































































































































































































































Search results

Summary of Contents for SAP-630FT

Reviews:

Related manuals for SAP-630FT

Brands by name

Popular brands

Sam4s SAP-630FT, Manual

Search results

Summary of Contents for SAP-630FT

Reviews:

Related manuals for SAP-630FT

Brands by name

Popular brands