Sam4s SAP-630FT, Manual

Page: 198 / 271

196
•
Program Mode Sam4POS 6600/4800II Program Manual v2.1
Note: When deciding the START number in the Column of Number, do not include the Sentinel Character and
any characters (i.e. =) that may appear within the data line.
Employee Card
One Employee Card setup is provided and cannot be deleted, no additional employee card formats are
allowed.
CARD DATA
Swipe your card to view the data on the card.
READ
Choose which track you want to read for MSR operations; Track1, Track2, or Track3.
CARD ID
Check this option if Card ID numbers are to be used, then touch CARD ID enter the ID number (up to
a 2-digits entry is allowed) from the magnetic cards that will be accepted. If ID numbers are not to be
used, do not check this field.
COLUMN OF CARD ID
Enter the column number where the you wish to START reading on the card number. (This does not
include the sentinel character).
COLUMN OF NUMBER
Enter the column number where the you wish to START reading on the card number. Enter the number
of DIGITs (up to a 2-digits entry) of the card number you wish to read beginning at the start digit.
Age Verification
There are four different age verification formats available in the S
AM
4POS by default. You can delete any age
verification formats that are not utilized in your area. Program the format specific for your application as
necessary or add additional formats as necessary.
Note: Be sure the “MSR Setting” programming is correct, prior to programming the Age Verification.
CARD DATA
Swipe your card to view the data on the card.
READ
Choose which track you want to read for MSR operations; Track1, Track2, or Track3.
COLUMN OF NUMBER
Enter the column number where the you wish to START reading on the card number.