Sam4s SAP-630FT Manual Download Page 61

Page: 61 / 271

Sam4POS 6600/4800II Program Manual v2.1

Program Mode

•

Select the operation from the menu that you want to perform.

EDIT MODE

Selecting the Edit Mode from the menu selections allows you to select multiple PLUs at the same time or

select all PLUs in the PLU file to edit the settings as necessary.

Available actions include:

•

Delete

•

Inactive

•

Print a barcode

•

Press the exit icon

to close the edit mode.

SORT

Select SORT from the available selections; Options to sort PLUs:

•

A TO Z or Z TO A
PLU CODE
PLU Status Group
Group #1, Group #2, Group #3
Recipe
Set Menu
MLU Chain

•

Price Option
Modifier QTY
Stock Link PLU#
Allow Price Change
Stock
Minimum Stock

FILTER

Select Filter from the available selections, choose from:

•

PLU Status Group

– select the PLU status group to view PLUs assigned to that

status group.

•

Group

– select the group to view just the PLUs assigned to that group.

•

From PLU Code

– Enter a PLU code to view just the PLUs from that code number

entered and higher.

•

No Sale PLUs

– This selection will display all PLUs with no sales activity.

LOAD MLU

Brings up the MLU screen. Select from the MLU’s to view items assigned to your selection. You will

be brought to the PLU programming screen for the selected PLU.

Adding New PLUs

New items (PLUs) can easily be added to the database. New PLUs can have up to a 30-character

name/descriptor and up to an 18-digit PLU code.

Press the add record icon

to add new PLUs to the database. The

“NEW”

item entry dialog

displays:

Summary of Contents for SAP-630FT
















































































































































































































































































Search results

Summary of Contents for SAP-630FT

Reviews:

Related manuals for SAP-630FT

Brands by name

Popular brands

Sam4s SAP-630FT, Manual

Search results

Summary of Contents for SAP-630FT

Reviews:

Related manuals for SAP-630FT

Brands by name

Popular brands