259
•
Sam4POS 6600/4800II Program Manual v2.1
Zero Auth
Use this operation to verify a card is valid, activated, not reported as
lost/stolen.
Performing EFT Operations
When performing EFT Operations, the EFT Operation communication between the ECR and the Tran
device is displayed on the S
AM
4POS. When the specified operation is completed, the register will
print the results of the requested operation at the register’s receipt printer. You can also print out the
EFT Operation communication to the register receipt if desired.
Initialize EFT
Select Initialize EFT to verify communications, software versions and installed networks.
1.
From the main
PROGRAM MODE
menu screen, select
DEVICE
, then touch
EFT
OPERATION
.
2.
Select
Datatran_Operation
from the selections.
3.
Select
INITIALIZE EFT
. The register will display “Information Working” 4.
The EFT
OPERATION dialog is displayed:
5.
You can PRINT the response if desired; then press
CLOSE
.
Sample Initialize EFT chit:
SAM4POS TERMINAL
11:26 WED
2017-09-27
**** LIST INSTALLED NETWORKS ****
EMC --- --- --- Ver: 3.95 SL
ON OFF OFF OFF
- - - - - - - - - - - - - - - - - - -
-
NO. 000005 REG# POS-1 MANAGER
List of Installed Networks
Status of Installed Networks
Software Version
Summary of Contents for SAP-630FT
