Sam4s SAP-630FT Manual Download Page 202

Page: 202 / 271

200

•

Program Mode

Sam4POS 6600/4800II Program Manual v2.1

Type a

DESCRIPTION

for the

selected Revenue Center; the

at the end of the field

clears the current
description.

Press the icon to

Test, Sort, or enter the Edit
Mode for the selected
device.

EDIT MODE –

Set

devices as inactive or delete
devices as necessary.

SORT –

Sort devices

alphabetically

Press the pencil icon

to add a note for the selected revenue center entry.

Terminal & Network

This program area is used to view the current Terminal Information and to setup IRC

(Inter-Register

Communication)

for the system.

Select

TERMINAL &

NETWORK

from the

NETWORK & REVENUE

selection menu. The

terminal information will REFRESH each time this area is accessed:

When the data has refreshed, the Terminal Info screen is displayed:

Press the

SET TO MAIN

RELEASE MAIN

button as needed.

SET TO MAIN –

will set the current station as the Main terminal in an IRC configuration.

RELEASE MAIN –

sets the current station as a satellite SUB Terminal.

Note:

ICR must be turned off on all substations before the current MAIN station can be released.

Press the add record icon

to add a new entry to the Revenue.

Summary of Contents for SAP-630FT
















































































































































































































































































Search results

Summary of Contents for SAP-630FT

Reviews:

Related manuals for SAP-630FT

Brands by name

Popular brands

Sam4s SAP-630FT, Manual

Search results

Summary of Contents for SAP-630FT

Reviews:

Related manuals for SAP-630FT

Brands by name

Popular brands