Salicru CV10-002-S2, User Manual

Page: 18 / 104

18 - 104 Keypad Operation Procedure
4 Keypad Operation Procedure
The keypad is used to control CV10 inverters, read the state data and adjust parameters.
Figure 4-1 Keypad
Note: Fix the external keypad with M3 screws or the installation bracket. The installation bracket is optional.
No. Name Description
1 State LED
RUN/TUNE
LED off means that the inverter is in the stopping state;
LED on means the inverter is in the running state.
FWD/REV
FWD/REV LED. LED off means the inverter is in
the forward rotation state; LED on means the
inverter is in the reverse rotation state
LOCAL/REMOT
LED for keypad operation, terminals operation and remote
communication control. LED off means that the inverter is in
the keypad operation state; LED blinking means the
inverter is in the terminals operation state; LED on means
the inverter is in the remote communication control state.
TRIP
LED for faults. LED on when the inverter is in the fault
state; LED off in normal state; LED blinking means the
inverter is in the overload pre-alarm state.
2 Unit LED
Mean the unit displayed currently
Hz Frequency unit
RPM Rotating speed unit
A Current unit
% Percentage
V Voltage unit