Salicru CV10-002-S2, User Manual

Page: 41 / 104

Function Parameters 41 - 104
Function
code
Name Detailed instruction of parameters
Default
value
Modify
P06 Group Output terminals
P06.01
Digital output
selection (Y)
0 : Invalid
1 : On operation
2 : Forward rotation operation
3 : Reverse rotation operation
4 : Jogging operation
5 : Inverter fault
6 : Frequency degree test FDT1
7 : Frequency degree test FDT2
8 : Frequency arrival
9 : Zero speed running
10 : Upper limit frequency arrival
11 : Lower limit frequency arrival
12 : Ready for operation
14 : Overload pre-alarm
15 : Underload pre-alarm
16 : Completion of simple PLC stage
17 : Completion of simple PLC cycle
18 : Setting count value arrival
19 : Defined count value arrival
20 : External fault
22 : Running time arrival
23 : MODBUS communication virtual terminals output
24
~
30 : Reserved
0 ○
P06.03
Relay RO
output
1 ○
P06.05
Polarity of
output
terminals
The function code is used to set the pole of the output
terminal.
When the current bit is set to
0 , output terminal is positive .
When the current bit is set to 1 , output terminal is negative .
BIT3 BIT2 BIT1 BIT0
Reserved RO1 Reserved Y
Setting range:00~0F
00 ○
P06.06
Y open delay
time
0.000~50.000s
0.000s
○
P06.07 Y off delay time 0.000~50.000s
0.000s
○