Ref. ATLANTA 500
Ref. ATLANTA 800
- 18 -
5. WARNINGS
6. FUNCTIONAL DESCRIPTION OF THE EQUIPMENT
SAGOLA S.A. has service Kits for the repair and replacement of consumable components in the unit, indicated in the
exploded view sheets.
Purge set
Full absorption probe
Anti-return
Absorption valve
Top block
Membrane
Regulator
Elbow
Motor coupling
Electric motor with 220 V Single phase 50 Hz
Oil level
Anti-recoil filter
Oil Renolin MR-10 (1 liter)
300 900 87
864 652 04
300 900 21
875 600 03
300 900 70
300 900 22
864 647 03
857 700 99
857 600 75
864 640 02
864 100 68
300 900 99
300 900 87
864 652 04
300 900 21
875 600 03
300 900 70
300 900 22
864 647 03
857 700 99
857 600 78
864 640 01
864 100 68
836 600 20
300 900 99
7. SERVICE KITS
- Before putting the unit into operation, and especially after
each cleaning and/or repair operation, a check must be
made that the equipment components are securely tighte-
ned and that the hoses are airtight (no leaks). Faulty parts
must be replaced or repaired as appropriate.
- The Unit is easy to handle thanks to its design and the
simplicity of its mechanisms. No special training is required
for handling the unit. This team is professional use only.
Use it according to the operating, maintenance and safety
instructions indicated in this manual and follow the applica-
tion methods indicated to obtain the required quality of
finish.
- Before putting the unit into operation, we recommend that
you clean the equipment as this has been subjected to
functional tests and before packaging it is treated internally
with a protective coating, some of which may still remain.
Apply thinner to eliminate this. Remove any residual
grease applied during assembly.
- The unit is depressurised when supplied (no pressure
inside).
- Ensure that the products to be applied are chemically
compatible with the components these come into contact
with (aluminium, stainless steel, polyethylene and acetal
resin).
- Do not use corrosive or abrasive products.
- Use SAGOLA anti-static hoses suited to the product to be
transferred.
- You must always connect the equipment and all the
elements involved in the work process to a grounding
connection to eliminate static electricity. If its resistance
exceeds the recommended limits, it must be fixed. An
equipment unit without or with a faulty grounding connec-
tion may make the installation dangerous.
- The total derivative resistance must be ≤1 million ohms.
The unit has been designed for long service and can be
used with most products available on the market. Its use
with highly aggressive products will quickly increase the
need for maintenance and spare parts. If you need to apply
special products, please contact SAGOLA S.A.
- Read and apply all the information, instructions and
safety measures indicated by the manufacturer of the
products to be applied (products to be applied, thinners,
etc.) as these may provoke chemical reactions, fires and/or
explosions, or be toxic, irritant or harmful and in all cases
dangerous for the health and personal safety of the user
and of other persons nearby (see chapter on Health and
Safety).
- Mix, prepare and filter the product to be applied in accor-
dance with the manufacturer's instructions, ensuring that
any foreign bodies are prevented from spoiling the quality
of finish and application. Should there be any doubt related
to the purity of the product, its composition, etc. please
contact your supplier.
- Control the viscosity of the product to be applied with the
SAGOLA Viscosimeter kit- Code 564 180 01.
The ATLANTA 500 / 800 equipment can be used to apply
medium viscosity products, commonly used in the sectors
of construction, automotive, Wood Industry, Plastic, etc.
The product to be applied (Varnishes, backgrounds,
primers, enamels and varnishes, etc.) is introduced into the
gravity tank or equipment is maintained in the container
itself that supplied by the manufacturer (Version equipment
absorption gauge).
From the cup it is fed by gravity to the interior of the unit.
From the manufacturer's container, with the unit in opera-
tion, by means of suction and through the probe it flows to
the interior of the unit.
From the unit, through the product hose and the gun, the
product is sprayed.
