Configuration methods
TELSAT GPRS
79
Datei 8123AD010_11.doc
Datei gespeichert
08.03.04 17:31 von EDV/ORGA
Druckzeit 08.03.04,
17:44
Status Release
15 Configuration methods
The complete configuration of the TELSAT GPRS is written in a parameter file called
para.ini
which is stored in the non-volatile memory of the device. When configuring the
TELSAT GPRS, the parameter file
para.ini
will be modified. The TELSAT GPRS can be
configured by following methods:
•
Local configuration by entering DTMF codes (using a telephone set). Using this
method the user can change only those parameters that are changed most often.
He cannot set all parameters by this method.
•
Loading the configuration file
para.ini
on the local or a remote PC by a FTP
program, then editing the file
para.ini
with a text editor and then upload the edited
file back to the device.
•
Remote configuration by sending configuration SMS.
•
Sending AT commands using a Terminal program on the local PC
To understand the various configuration methods you have to know how the
parameters to be set are identified. So lets have a look in an excerpt of the file para.ini:
See a sample file
para.ini
on page 107.
Excerpt of the file
para.ini
:
[DIALING]
;settings for channel a
CHA_FAST_DIAL=NO
CHA_DIAL_TIMEOUT=600
CHA_LOCAL_CALL_WAIT=NO
CHA_LOCAL_CALL_CTRL=NO
CHA_TX_VOICE_LEVEL=-7
CHA_RX_VOICE_LEVEL=-7
SECTION
The file para.ini consists of various sections.
Comment that gives instructions to the user
PARAMETER
This is the name of the parameter to be set.
VALUE
This is the value for the parameter. Note the
equation mark (=) between parameter and
value. No blank!
Para.ini
by DTMF codes
(using a telephone)
by editing the config.
file para.ini
(download and upload
by FTP program)
by sending AT
commands
Local configuration:
Remote configuration:
by SMS
by editing the config.
file para.ini
(download and upload
by FTP program)
