Operation: Send and receive fax with a facsimile device
TELSAT GPRS
19
Datei 8123AD010_11.doc
Datei gespeichert
08.03.04 17:31 von EDV/ORGA
Druckzeit 08.03.04,
17:44
Status Release
5.2
In case of a FAX Warning
If both FAX Warning LEDs are rapidly flashing, the TELSAT GPRS is indicating that it
could not transfer a received fax to the connected facsimile device completely (see
above). The part that is not transferred is stored in the TELSAT GPRS. Please check
your facsimile device. Be sure that it is in correct operation mode. Then give the
command to the TELSAT GPRS to transfer the stored fax to your facsimile device. Use
a telephone connected to the
Phone port
or to the
Fax/Modem/Phone
port to give the
following command:
Description:
#*222#
After you have entered the code, the TELSAT
GPRS will start to send the saved fax part to
your facsimile device.
#*999#
This command will delete the partly saved fax
and will reset the FAX Warning.
means: wait for the confirmation tone (up to 3 sec):
a high pitched beep signals: OK
a low frequency beep-beep signals: Wrong entry.
!
You can configure the fax function according your needs. See page 31.
