Operation: Analogue Modem connections
20 TELSAT
GPRS
Datei 8123AD010_11.doc
Datei gespeichert
08.03.04 17:31 von EDV/ORGA
Druckzeit 08.03.04,
17:44
Status Release
6 Operation: Analogue Modem connections
!
With an analogue modem connected to the
Fax/Modem/Phone
port of the
TELSAT GPRS you can send and receive data to/from a remote modem being
connected to an analogue telephone line or to/from a GSM modem. Please install
and operate the modem in accordance to its user manual and the manual of the
software you run on the computer connected to the modem.
!
Please note that by default incoming data calls are indicated on the
PC
port. To
change this setting, please see
Select Port for Data Calls
on page 32.
!
For data communication with your PC directly connected to the TELSAT GPRS,
please see details page 40.
!
If the called party’s modem is connected to the fixed network, it must support
9600 bps (V.32) / V.42 for the connection into the fixed network. This is necessary
for the communication to the GSM network.
!
The TELSAT GPRS supports
•
modem connections up to 9600 bps
•
modem connections according to the ITU-Standards V.21, V.22, V.22bis and
V.32.
Your modem should support MNP2 to ensure that no data are lost due to flow
control problems.
!
You can configure the function according your needs. See
Data Call Configuration
,
page 32.
