For experienced Users: AT commands
68 TELSAT
GPRS
Datei 8123AD010_11.doc
Datei gespeichert
08.03.04 17:31 von EDV/ORGA
Druckzeit 08.03.04,
17:44
Status Release
Command
Function
(factory setting in bold print)
0...7 as RXQUAL values in the table in GSM 05.08 [20]
subclause 8.2.4
99 not known or not detectable
AT+CNUM
Displays Subscriber Number
AT+CIMI
Request international mobile subscriber identity
AT+CGSN
Request product serial number identification
AT+CGQREQ=[
cid
[,
precedence
[,
delay
[,
reliability
[,
peak
[,
mean
]]]]]]
This command specifies a Quality of Service Profile that is used
when the device sends an Activate PDP Context Request
message to the network.
If a value is omitted for a particular class then the value is
considered to be unspecified.
cid =
a numeric parameter which specifies a particular PDP
context definition (see the +CGDCONT and
+CGDSCONT commands)
precedence =
a numeric parameter which specifies the precedence
class
delay =
a numeric parameter which specifies the delay class
reliability =
a numeric parameter which specifies the reliability class
peak =
a numeric parameter which specifies the peak
throughput class
mean
=
a numeric parameter which specifies the mean
throughput class
