Operation: Send and receive fixed network SMS
22 TELSAT
GPRS
Datei 8123AD010_11.doc
Datei gespeichert
08.03.04 17:31 von EDV/ORGA
Druckzeit 08.03.04,
17:44
Status Release
7.1
In case of error
Sending a SMS
In case of error the TELSAT GPRS can send an error report on
the telecomms equipment you have used to send the SMS. You
can activate or deactivate this function (see page 36).
Receiving a SMS
When the TELSAT GPRS detects an incoming SMS it will give
notice to the device that is connected to its configured SMS-port
(see
Select port to receive SMS
, page 33), so that this device will
ring, receive the SMS and display it.
When the TELSAT GPRS is not successful to transfer the SMS it
will retry to repeat the transmission 2 times.
If the TELSAT GPRS is still not successful to transfer the SMS
after these retrials, the user can invoke a retransmission when his
device is ready.
To do this enter the following sequence:
Description:
*10#
After you have entered the code, the TELSAT
GPRS will restart the transmission.
means: wait for the confirmation tone (up to 3 sec):
a high pitched beep signals: OK
a low frequency beep-beep signals: Wrong entry.
