For experienced Users: AT commands
66 TELSAT
GPRS
Datei 8123AD010_11.doc
Datei gespeichert
08.03.04 17:31 von EDV/ORGA
Druckzeit 08.03.04,
17:44
Status Release
Command
Function
(factory setting in bold print)
AT+CCLK=
time
Set real time clock.
time
= string type value; format is "yy/MM/dd,hh:mm:ss", where
characters indicate year (two last digits), month, day,
hour, minutes, seconds
AT+CCLK?
Displays the time:
+CCLK: time (see above)
AT+CGMI
Request manufacturer identification
AT+CGMM
Request model identification
AT+CGMR
Request revision identification
AT+CPWD=
oldpw,
newpw
Change Password.
oldpw
shall be the same old password specified for the facility
newpw
is the new password;
maximum length of password can be determined with
pwlength
AT+CPWD=
pwlength
Sets integer type maximum length of the password for the facility
AT+CREG=
n
Network registration
Parameters:
n =
0: disable network registration unsolicited result code
1: enable network registration unsolicited result code
+CREG: <stat>
2: enable network registration and location information
unsolicited result code +CREG: <stat>[,<lac>,<ci>]
<stat>
:
0: not registered, ME is not currently searching a new
operator to register to
1: registered, home network
2: not registered, but ME is currently searching a new
operator to register to
3: registration denied
4: unknown
5: registered
<lac>:
string type; two byte location area code in hexadecimal
format (e.g. "00C3" equals 195 in decimal)
<ci>: string type; two byte cell ID in hexadecimal format
