Parameters in the file para.ini: advanced configuration
TELSAT GPRS
97
Datei 8123AD010_11.doc
Datei gespeichert
08.03.04 17:31 von EDV/ORGA
Druckzeit 08.03.04,
17:44
Status Release
16.15 RING frequency
Can be configured by SMS (see page 83)
Can be configured by FTP (see page 84)
The frequency of the RING signal can be selected between 25Hz and 50Hz.
CHA_HIGH_RING_FREQ defines the RING frequency for the
Phone port
.
CHB_HIGH_RING_FREQ defines the RING frequency for the
Fax/Modem/Phone
port
.
If the setting is NO, the RING frequency is 25Hz.
Section:
RING
Meaning Parameter Permitted
Values
Factory Setting
Ring 50Hz (else 25Hz) CHA_HIGH_RING_FREQ YES, NO
NO
Ring 50Hz (else 25Hz) CHB_HIGH_RING_FREQ YES, NO
NO
16.16 Dialling configuration
Can be configured by SMS (see page 83)
Can be configured by FTP (see page 84)
Fast Dialling
Normally you must enter the telephone number completely before the TELSAT GPRS
can start dialling. The TELSAT GPRS starts dialling until you do not press any more
key on the telephone and after the
dial timeout
is expired - the duration the TELSAT
GPRS waits for any new key stroke.
If the function
Fast Dialling
is enabled, the TELSAT GPRS starts dialling immediately
when you terminate the dial sequence by pressing the
Fast Dialling Key
: a
#
.
For example: 00331234567#.
Section:
DIALING
Meaning Parameter
Permitted
Values
Factory Setting
Fast Dialling Port A
CHA_FAST_DIAL
YES, NO
NO
Dial timeout in 10ms
CHA_DIAL_TIMEOUT
600
Fast Dialling Port B
CHB_FAST_DIAL
YES, NO
NO
Dial timeout in 10ms
CHB_DIAL_TIMEOUT
600
