Putting the device into operation
TELSAT GPRS
13
Datei 8123AD010_11.doc
Datei gespeichert
08.03.04 17:31 von EDV/ORGA
Druckzeit 08.03.04,
17:44
Status Release
3.5 Autopin
option
Autopin is a special function to prevent against the use of the TELSAT GPRS' SIM card
in another terminal.
Please insert the SIM card as described on page 9 and switch on the TELSAT GPRS.
Enter the PIN of the SIM card. The TELSAT GPRS will automatically change the PIN
number by a secret value. Be careful, you can enter only once a wrong PIN (instead of
twice as in section 3.4).
If the TELSAT GPRS restarts again with this same SIM card, you will no more have to
enter the PIN: the TELSAT GPRS will use its secret value.
TELSAT GPRS with Autopin function can also work with SIM cards with PIN function
deactivated: in this case you will not have to enter the PIN and the TELSAT GPRS will
not change the PIN of the SIM card.
3.6
Enter the PUK number
If you have entered a wrong PIN three times in sequence, the
LED will flash
with a significant cadence. In this case you have to enter the PUK (Personal
Unblocking Key) which you should have received from your network provider with your
SIM card. This will unblock the SIM card.
To enter the PIN:
*9
PUK * nPIN * nPIN #
It means:
PUK
Please enter your PUK here.
npin
Please enter a new PIN here. Allowed PIN numbers are 0000 to 99999.
3.7 Wall-mounting
The TELSAT GPRS is intended to be mounted on the wall. You can fix it to the wall
with screws.
To mount the device on the wall, first disconnect all the cables. In particular make sure
that the power cable is not connected.
We suggest that you check the reception before finally fixing the mounting.
