Parameters in the file para.ini: advanced configuration
90 TELSAT
GPRS
Datei 8123AD010_11.doc
Datei gespeichert
08.03.04 17:31 von EDV/ORGA
Druckzeit 08.03.04,
17:44
Status Release
16.8 Prefix for Analogue Data and Fax calls
Can be configured by SMS (see page 83)
Can be configured by FTP (see page 84)
If your Analogue modem or fax machine dials either the fax or data prefix before the
telephone number, the TELSAT GPRS detects that it is an Analogue data or fax call
and switches in the correct mode. You can change these prefixes. Please ensure that
your chosen prefix differs from all DTMF configuration code.
Section:
DIALING
Meaning
Parameter
Permitted Values Factory Setting
Force Analogue
data call
DATA_PREFIX
Dial string of 3...6
characters
***
Force Analogue fax
call
FAX_PREFIX
Dial string of 3...6
characters
###
16.9 Local accepted emergency number
Can be configured by SMS (see page 83)
Can be configured by FTP (see page 84)
The GSM standard does only allow a few Emergency call numbers. You may specify
up to 3 Emergency numbers, which will be translated into a GSM-valid Emergency
number automatically, if it is entered at the
Phone
or
Fax/Modem/Phone
port.
Example:
You have specified 111111 as the TELSAT GPRS Emergency number. If this
number is dialled, the TELSAT GPRS will translate this number to 112 which
is a official GSM-valid emergency number.
Section:
CALL_MUX
This section includes mainly the parameter for call routing
Meaning
Parameter
Permitted Values Factory Setting
Local accepted
emergency number
EMERGENCY_1 40
digits
112
Local accepted
emergency number
EMERGENCY_2 40
digits
112
Local accepted
emergency number
EMERGENCY_3 40
digits
112
