3-4
Using the Operator Panel
Status Information
Error codes
See the Troubleshooting section in the terminal user guide.
Message
Meaning
Self test
The printer is performing self-diagnostics after power-up.
Please wait
The printer is warming up and is not ready.
When the printer is switched on for the first time, this message will take
several minutes.
Please wait
(Adding toner)
Toner is currently being replenished. This message may be displayed
during continuous printing of a large volume of pages which require a
large amount of toner such as with photographs, etc.
Ready
The printer is ready to print.
Processing
The printer is receiving data to print. This is also shown when the
printer is reading a memory card, hard disk or RAM disk.
Sleeping
The printer is in Auto Sleep. The printer wakes from Auto Sleep
whenever a key on the operator panel and
[GO]
is pressed, the cover
is opened or closed, or a print job is received. The printer then warms
up and goes on-line. For details on Auto Sleep, See “Sleep Timer
Timeout Time”, page 3-65
Cancelling data
Cancelling data Jobs inside the printer are being canceled. To cancel
a job, See “Canceling a Printing Job”, page 3-10
Waiting
The printer is waiting for the rest of print job before completing the last
page. Pressing
[GO]
allows you to obtain the last page immediately.
See below.
FormFeed TimeOut
The printer is printing the last page after a waiting period.
LU 252 745 005 Fonctions d'impression HFF GB.book Page 4 Mercredi, 7. juin 2006 4:56 16
