3-42
Using the Operator Panel
Operating the Storage Device
The printer supports four types of storage device; CompactFlash card, Microdrive,
USB flash memory, and RAM disk. The CompactFlash card and Microdrive are
installed into the dedicated slots of the printer. The RAM disk is an allocated part of
the printer’s memory. If the Microdrive is installed in the printer, the e-MPS function
will be available. For details, See “e-MPS”, page 3-18.
The basic operations of each storage device are the same. This section explains the
operation of the memory card.
Using the Memory Card
The printer is equipped with a slot for a memory card. By inserting a memory card
into the printer, the following operations become available.
• Reading Font Data
• Reading Data
• Writing Data
• Deleting Data
• Formatting Memory Card
• Printing a List of Data Namesées
For details about the handling of the memory card, See “Microdrive (Hard Disk)/
CompactFlash (Memory) Card”, page 4-6.
Reading Font Data
If a memory card with the font data card is inserted into the slot when the printer is
turned on, the fonts are automatically read into the printer.
Press
[MENU]
.
Press
or
repeatedly until
Memory Card >
appears.
Press
.
Press
or
repeatedly until
> Read Fonts
appears.
Press
[OK]
. A question mark (?) appears.
Press
[OK]
.
Processing
appears and the reading of data from the memory
card starts. When completed,
Processing
disappears.
Press
[MENU]
. The display returns to
Ready
.
LU 252 745 005 Fonctions d'impression HFF GB.book Page 42 Mercredi, 7. juin 2006 4:56 16
