3-31
Using the Operator Panel
Making Default Settings
Using the operator panel, you can set the default for the following items.
Default Emulation
You can change the emulation mode and character code set for the current
interface. The printer is capable of the following emulation modes:
• HP PCL 6 (HP Color LaserJet 8550)
• KPDL3 (compatible with PostScript 3)
The printer can automatically switch between emulation mode depending on the
print job that is received from the computer. To do this, select KPDL (AUTO) in the
following procedure.
Press
[MENU]
.
Press
or
repeatedly until Emulation > appears on the message display.
One of the emulation modes appears, indicating the emulation currently in
use.
PCL 6 (default)
KPDL
KPDL (AUTO)
Line Printer
IBM Proprinter
DIABLO 630
EPSON LQ-850
To change the default emulation, press
[OK]
. A blinking question mark (?)
appears.
Press
or
repeatedly until the
Network appears. Press [OK]
.
Press
[OK].
Press
[MENU]
. The display returns to Ready.
Printing KPDL Errors
The printer can print error descriptions when printing error occurs during KPDL
emulation. The default is Off — the printer does not print KPDL errors.
Press
[MENU]
.
Press
or
repeatedly until Emulation > appears.
Press [OK]. A blinking question mark (?) appears.
Select KPDL or KPDL (AUTO) using
or
LU 252 745 005 Fonctions d'impression HFF GB.book Page 31 Mercredi, 7. juin 2006 4:56 16