3-69
Using the Operator Panel
Duplex Printing Error Detection Setting
If the error detection setting for duplex printing has been turned On, and you attempt
to print onto a paper size and paper type that cannot be used for duplex printing, the
Duplex disabled Press GO error message will be displayed and printing will stop. To
print onto one-side of the paper only when this message is displayed, press
[GO]
.
The default setting is Off.
Press
[MENU]
.
Press
or
repeatedly until
Others >
appears.
Press
.
Press
or
repeatedly until
>Finishing Error >
appears.
Press
and display
>>Duplex
.
Press
[OK]
. A blinking question mark (?) appears.
Press
or
to change
Off
to
On
.
Press
[OK]
.
Press
[MENU]
. The display returns to
Ready
.
Printing the Service Status Page
The service status page contains printer settings information that is more detailed
than the standard status page and is therefore mostly for service purposes.
However, there is a great deal of information on the service status page that may be
useful to you.
Press
[MENU]
.
Press
or
repeatedly until
Others >
appears.
Press
.
Press
or
until
>Service >
appears.
Press
.
Press
or
repeatedly until
>>Print Status Page
appears.
Press
[OK]
. A question mark (?) appears.
Press
[OK]
. The display indicates
Processing
and printing starts.
LU 252 745 005 Fonctions d'impression HFF GB.book Page 69 Mercredi, 7. juin 2006 4:56 16
