3-40
Using the Operator Panel
Dark vertical stripes
Set the KIR mode to Off. Try printing the status page again. If you still get dark
vertical stripes, adjust the print density control to a lighter setting.
White vertical stripes
Set the KIR mode to On. Try printing the status page again. If you still get white
vertical stripes, adjust the print density control to a darker setting.
Press
[Menu]
.
Press
or
repeatedly until
Print Quality >
appears.
Press
.
Press
or
repeatedly until
>KIR Mode
appears.
Press
[OK]
. A blinking question mark (
?
) appears.
Select
On
or
Off
using the
?
or
@
.
Press
[OK]
.
Press
[Menu]
. The display returns to
Ready
.
EcoPrint Mode
The EcoPrint enables you to reduce the amount of toner consumed on the page so
as to save your printing costs. You can set the EcoPrint mode to On, as follows. (The
factory default setting is Off.) When the EcoPrint mode is set to On, the toner
consumption is reduced and the print density becomes lighter. The EcoPrint setting
has no effect on the print speed.
EcoPrint setting is
Off
(default)
EcoPrint setting is
On
LU 252 745 005 Fonctions d'impression HFF GB.book Page 40 Mercredi, 7. juin 2006 4:56 16
