3-66
Using the Operator Panel
Printer Resetting
The procedure described below resets the printer’s temporary conditions, such as
the current page orientation, font, etc., set by commands to their default values.
Downloaded fonts and macros are deleted from the printer’s memory.
Press
[MENU]
.
Press
or
until
Others >
appears.
Press
.
Press
or
repeatedly until
>Restart Printer
appears.
To reset the printer, press
[OK]
. A question mark (?) appears.
Press
[OK]
again. Self test appears while the printer is resetting itself, followed
by Please wait and then Ready.
Resource Protection
By default, when you switch from the PCL 6 emulation to another, all downloaded
fonts and macros will be lost. Resource protection preserves these PCL resources
in memory so that they remain intact even when you have switched back in PCL 6.
Note :
Resource protection requires extra memory to store the downloaded fonts and
macros. The total size of the printer memory recommended for using the resource
protection option is affected by several factors. See “Expansion Memory Modules”,
page 4-3.
By default, resource protection is deactivated.
Press
[MENU]
.
Press
or
repeatedly until
Others >
appears.
Press
.
Press
or
repeatedly until
>Resource Prot.
appears.
Press
[OK]
. A blinking question mark (?) appears.
Press
or
to select Permanent or Perm / Temp (Permanent/ Temporary)
for resource protection.
When the desired resource protection is displayed, press
[OK]
.
To exit the menu selection, press
[MENU]
.
LU 252 745 005 Fonctions d'impression HFF GB.book Page 66 Mercredi, 7. juin 2006 4:56 16
