3-67
Using the Operator Panel
Alarm (Buzzer) Setting
You can set an alarm sound in addition to the message displayed when the paper
supply is exhausted, or when paper jamming occurs. This setting is useful, for
example, when the printer is located some distance from the user.
The audio alarm is set to On when leaving the factory. If the alarm is set to Off, it will
not sound.
Press
[MENU]
.
Press
or
repeatedly until
Others >
appears.
Press
.
Press
or
repeatedly until
Buzzer
appears.
Press
.
Press
or
to display the desired alarm. The display changes as shown
below.
Error
Ready
Job End
Key Confirm.
Press
[OK]
. A blinking question mark (?) appears.
Select
On
or
Off
using
or
.
Press
[OK]
.
To exit the menu selection, press
[MENU]
.
Auto Error Clear Setting
If an error that still allows you to continue printing occurs, the next received data is
automatically printed after a set period of time elapses. For example, if the printer is
shared over a network as a network printer and one person causes one of the above
errors, after the set period of time elapses, the data sent from the next person is
printed. The default setting is Off (Auto Error Clear disabled). The auto clear errors
are:
• Memory overflow
• Print overrun
• KPDL error
• File is not found
• RAM disk error
• CompactFlash card error
• Microdrive error
• Duplex printing is disabled
• e-MPS job is not stored
LU 252 745 005 Fonctions d'impression HFF GB.book Page 67 Mercredi, 7. juin 2006 4:56 16
