3-32
Using the Operator Panel
Press
[OK]
.
Press
or
until >Print KPDL Errs (errors) appears.
Press
[OK]
. A blinking question mark (?) appears.
Select On using
or
. Press
[OK]
.
Press
[MENU]
. The display returns to Ready.
Default Font
You can select the default font for the current interface. The default font can be one
of the internal fonts or a font that is downloaded to the printer memory or stored on
memory card or hard disk.
In this menu, you can also set the type and pitch for Courier and Letter Gothic; as
well as to print a font list.
Press
[MENU]
.
Press
or
until
Font >
appears.
Press
. Press
or
until
>Font Select >
appears.
To select an internal font, make sure that Internal is displayed and press
.
The display changes. If I
nternal
is not displayed, press
[OK]
, then press
or
until it appears.
To select an optional font, press
[OK]
while
>Font Select >
is displayed. Press
or
repeatedly until
Option
appears and then press
[OK]
. Press
next
to display the font selection shown above. You can perform this operation only
when optional fonts are installed in the printer.
The letter before the number indicates the location of the font, as shown
below:
- I
Internal font
- S
Soft (downloaded) font
- M
Fonts in optional memory card
- H
Fonts in RAM disk or optional hard disk
- O
Fonts in optional ROM (API)
Press
[OK]
. A blinking question mark (?) appears.
Press
or
repeatedly until the desired font number appears. For font
numbers of the internal fonts, See “Printing Lists of Fonts”, page 3-34.
When the desired font is displayed, press
[OK]
.
Press
[MENU]
. The display returns to Ready.
LU 252 745 005 Fonctions d'impression HFF GB.book Page 32 Mercredi, 7. juin 2006 4:56 16
