3-44
Using the Operator Panel
Check that the message display has changed to Waiting, then press [GO].
This writes the file to the memory card and instructs the printer to automatically
print out a memory card write information page as shown below.
The file is written onto the memory card given a destination name (also
referred to as a partition name) which the printer automatically assigns
oneafter another as follows: DataS001 (first data), DataS002 (second data),
DataS003 (third data).
The write information page includes the following items:
When the memory card write information page is printed, the display returns to
Ready.
Repeat above steps until you have transferred all data (files) that you want to
write to the memory card. Each time you finish writing data, a memory card
write information page is printed from the printer showing the information, but
pertaining only to the data just written. To see all data contained in the memory
card at once, print a list of data names as explained. See “Printing a List of
Data Names (Partitions)”, page 3-46.
Item Description
Partition Type
Type of data written (currently only
type 2 is supported).
Partition Name
The destination name of data written
to the card.
Write Partition Length
The size of the written data on the
memory card.
Others
Error information.
LU 252 745 005 Fonctions d'impression HFF GB.book Page 44 Mercredi, 7. juin 2006 4:56 16
