3-43
Using the Operator Panel
Reading Data
You can print out the data in the memory card.
Press
[MENU]
.
Press
or
repeatedly until
Memory Card >
appears.
Press
.
Press
or
repeatedly until
>Read Data
appears (Report, in this example).
Press
[OK]
. A blinking question mark (?) appears before the data name.
Press
or
to display the desired data name.
Press
[OK]
.
Processing
appears and the reading of data from the memory
card starts.
Writing Data
Data can be written to a memory card until the card is full. When writing to a memory
card, a name is assigned to the file automatically. You can use the procedure
explained in the section “Printing a List of Data Names (Partitions)”, page 46 to print
a list of data names for confirmation.
Note :
First check that the memory card is properly formatted. Otherwise, the >Write Data
message to be explained below will not be shown on the message display. If the
memory card inserted in the memory card slot is not formatted, >Format will auto-
matically appear on the message display. Format the memory card. See “Format-
ting a Memory Card”, page 3-45.
Press
[MENU]
.
Press
or
repeatedly until
Memory Card >
appears.
(Report, in this example).
Press
.
Press
or
repeatedly until
>Write Data
appears.
Press
[OK]
. A question mark (?) appears.
Press
[OK]
.
Processing
appears, then Waiting.
Send the file from the computer to the printer.
As the printer receives data, the message display changes to Processing, then
when the end of the data is received, the message display changes to Waiting.
LU 252 745 005 Fonctions d'impression HFF GB.book Page 43 Mercredi, 7. juin 2006 4:56 16
