Cable guide (105)
6.3.2 Mount the cable guide (105) on the pad
retainer (11). In the right position, the cable guide
(105) will lock into the pad retainer (11) with only
light pressure.
Press the wear indicator cable (101) into the guide
tabs of the cable guide (105) (see both arrows A).
Depending on the vehicle type, route the cable
harness for the vehicle power supply into one of the
two guide tabs (see arrow B) (see Fig.).
Note: The short cable end is not guided in
(arrow C).
Mount the cover plate (104)
Locate the cover plate (104) on one edge of the
pad retainer (11). Ensure the correct position of the
retaining lugs of the cover plate (104) (see arrow E).
When radial pressure is applied to the cover plate
(104), it will lock into place in the pad retainer (11)
(see Fig.).
6.3.4 - Locking the cable guide in place
6.3.5 - Mounting the wear indicator cable to the
cable guide
6.3.6 - Mounting the cover plate
Secure the wear indicator cable (101) such that it
cannot chafe.
Danger !
Replacing the brake pads
26
en
XL-SA40001RM-en-DE Rev A • 02.2016 • Errors and changes excluded © SAF-HOLLAND
