Chapter 1: Introduction
User Manual
1-14
cursor at: ECG, NIBP, SpO2, IBP, BFA (for 12
"
or larger), TEMP or
RESP/CO2/Multi gas parameter area of the screen. When the cursor is
located on a specific parameter area, you can change setting of that
parameter as follows:
1. A menu pops up, by pressing the knob.
2. Move the cursor frame to related parameter in opened menu by turning
the knob.
3. Change the content by pressing the knob on the special parameters and
choose your setting and confirm your selection by pressing it.
Press to call up HOME/ALARM Window and change the alarm setting
of each parameter.
Alarm Limits
⑧
Press to call up ECG/LEAD Window and change lead setting.
ECG Lead
⑨
Press to access different pages of the system.
Pages
⑩
Press to capture a picture of what is on your screen and saving it in a
window in which you can see, delete or print the picture.
This button currently is not applicable
Print Screen
⑪
Press to view list of arrhythmia events
Arr List
⑫
Press to call up NIBP/NIBP LIST Window.
NIBP List
⑬
Press to call up HOME/TREND Window.
Trend
⑭
This button is not still active.
Silence
⑮
Press to call up ECG/GAIN Window and change gain setting.
ECG Gain
⑯
Press one of these keys to call up the IBP/ZERO WINDOW. Press this
key again to perform zeroing procedure for IBP1,2 channels.
BP1,2 Zero
⑰
Press one of these keys to call up the IBP3,4/ZERO WINDOW. Press
this key again to perform zeroing procedure for IBP3,4 channels.
(F1:IBP3)(F2:IBP4)
F1,F2
