Saab R5 SUPREME AIS, Operation & Installation Manual

Page: 53 / 156

R5
SUPREME - Navigation System
CONFIGURATION
7000 118-301, A3 Page 53
CDU LWE ID The unique ID that is used on the Light Weight Ethernet
network. For example if this parameter is set to ―3141‖
the R5 SUPREME CDU will transmit messages on the
LWE network with the LWE ID ―GP3141‖.
This ID must be unique for all equipment connected to
the same LWE network.
4.2.14 Compass Data Port
This view is accessed by pressing Main

Maintenance

Configuration

Interface

Input

Compass Data Port
Parameter Name Description
Input Port Specifies the input port that should be used for heading
sensor data. Can be set to User Port 1, 3 or 4 or to
―Any‖.
Heading sensor data received on a port that does not
correspond to this setting will be ignored.
Input Sentence This parameter makes it possible to only use a specific
NMEA sentence for heading data.
Input Talker ID This parameter makes it possible to only use sentences
from a specific talker (having a specific NMEA talker
ID) for the heading data.
4.2.15 Depth Data Port
This view is accessed by pressing Main

Maintenance

Configuration

Interface

Input

Depth Data Port
Parameter Name Description
Input Port Specifies the input port that should be used for depth
sensor data. Can be set to User Port 1, 3 or 4 or to
―Any‖.
Depth sensor data received on a port that does not
correspond to this setting will be ignored.
Input Sentence This parameter makes it possible to only use a specific
NMEA sentence for depth data.
Input Talker ID This parameter makes it possible to only use sentences
from a specific talker (having a specific NMEA talker
ID) for the depth data.
Use NMEA Offset If yes, any depth offset information available in the DPT
sentence is added to the depth value taken from this
sentence.