Saab R5 SUPREME AIS, Operation & Installation Manual

Page: 66 / 156

R5
SUPREME - Navigation System
OPERATION
7000 118-301, A3 Page 66
Figure 31
– Anchor Watch Activated
If the calculated range exceeds the alarm distance, the anchor watch alarm will be
activated if configured to enabled in the
Alarm Config view. If the range
subsequently falls below the configured alarm distance, the anchor watch alarm
condition will be deactivated. It will re-activate any time the range exceeds the limit
again.
5.8.3 Active Route
The Active Route view shows information on the active route, including route name,
route length, number of total and remaining waypoints, ETA and details of the
remaining waypoints.
From this view it is possible to access the Edit Active Route , Set Target ETA and Set
Next WPT sub views. The Edit Active Route sub view can be used to modify legs and
waypoints of the active route. The Set Target ETA view can be used to set a target for
Estimated Time of Arrival. The Set Next WPT view can be used to change the waypoint
in the active route that currently is being navigated towards. The latter is useful to
quickly skip to a certain position in the active route or to unpass a previously passed
waypoint.
The Active Route view is illustrated below. When entering the view the list shows
bearing and distance to the remaining waypoints in the active route.
Figure 32
– Active Route (Bearing and Distance)