Saab R5 SUPREME AIS, Operation & Installation Manual

Page: 68 / 156

R5
SUPREME - Navigation System
OPERATION
7000 118-301, A3 Page 68
5.8.3.1 Edit Active Route
Press ―
Edit Route
‖ to enter the
Edit Active Route view. This view is used to modify
the active route. It displays all waypoints and legs in the active route, regardless if
they are passed or not and including waypoints created when resetting cross-track
error in the
Navigation Info view. It is possible to modify navigation algorithm, cross-
track error limit and RAIM setting for each leg, as well as remove, modify and insert
waypoints. When entered, the view displays all the waypoints of the route, as
illustrated below.
Figure 36
– Edit Active Route
When saving the active route, a popup will appear where it is possible to choose if a
change made to the active route should leave the original route unaffected or if the
changes should be saved in the route database as well.
Press ―Yes‖ to affect both
active route and the route in the database.
Press ―No‖ to only affect the active route.
Figure 37
– Save changes in Edit Active Route
No
te: Waypoints named ―Reset XTE ...‖ have been inserted into the route when
resetting the cross-track error. When saving changes, they will not be stored. The
original route will
not
be affected by changes made to legs towards or between such
waypoints, nor will such legs be created in the original route. These waypoints are
not viewed as part of the planned route.