Saab R5 SUPREME AIS, Operation & Installation Manual

Page: 87 / 156

R5
SUPREME - Navigation System
OPERATION
7000 118-301, A Page 87
5.9.2.8 Delete a Waypoint
1. Select the waypoint to be deleted in the waypoint list
2.
Press the button ―WPT‖ followed by ―Delete‖.
3.
A confirmation popup will appear, press ―Yes‖ to delete the waypoint. It is
NOT possible to delete a waypoint that is used by any route. If the selected
waypoint is included in one or more routes a popup will be displayed
showing which routes includes it.
5.9.2.9 Delete All Waypoints and Routes
1.
Press the button ―WPT‖ followed by ―Delete All‖.
2.
A confirmation popup will appear, press ―Yes‖ to delete all the waypoints and
all the routes in the system.
5.9.3 Scheduled Alerts
The Scheduled Alerts view allows the user to create and inspect alerts scheduled to
activate alarms at certain points in time.
There are two types of alerts that may be scheduled. Time alerts are activated at a
specific time and can be set to be a single alarm or a recurring alarm with a certain
time interval. ETA alerts will be activated at certain time prior to ETA of the current
active route.
When a scheduled alert is activated, a popup will appear and the R5 CDU buzzer will
be activated if scheduled alert sound parameter is set to ―Beep‖ or ―Continuous‖ in
Sound Config view as described in section 4.3.6.
Figure 67
– Scheduled Alerts View
5.9.3.1 Create Time Alert
1. To create a new time alert,
press the button ―Create Time Alert‖. The
Create
Time Alert view is shown: