VC-400RT
+
Managed VDSL2 CPE Router MANUAL Ver. A5
85
The screen contains the following details:
Fields in Add/Modify a Classifier Rule:
Field
Description
Classifier Name
This is the name of Classifier. This is an Unique identifier for an
instance of classifier rule.
Enable
This is used to enable or disable the QoS Classifier entry.
Classifier Interface
This is used to select upstream/downstream classifier.
Disable acceleration
This is used to disable acceleration for this classifier.
Queue Name
This is the Queue Identifier to be associated with this classifier rule. This
is presented in dropdown for associating with this classifier entry.
Ingress Interface
Packet Input Source for classified flow.
Classifier Type
Type of Classifier - Multi Field Classifier (MFC) or DSCP or 802.1p
based.
Rate Control Enable
Configuration of classifier based rate control.
Rate Limit
Rate limit per classifier.
Outgoing DSCP
Outgoing DSCP Marking - if any to be done on this classifier rule.
Incoming DSCP
Incoming DSCP for identifying the flow.
Incoming 802.1P
Incoming 802.1P for identifying the flow.
Outgoing 802.1P
Outgoing 802.1P Marking - if any to be done on this classifier rule.
VLAN Id
Incoming VLAN id.
Source MAC
Source MAC classification.
Source MAC Mask
Mask bits for Source MAC.
Destination MAC
Destination MAC classification.
Destination MAC Mask
Mask bits for Destination MAC.
L3 Protocol
Dropdown to select IPv4/IPv6.
Source IP
Source IPv4/IPv6 classification.
Netmask
Mask bits for Source IP.
Destination IP
Destination IPv4/IPv6 classification.
Netmask
Mask bits for Source IP.
L4 Protocol
Dropdown to select L4 protocol like UDP/TCP/ICMP etc.
Source Port Range
Start and end source port range.
Destination Port Range
Start and end destination port range.
Order
Classification order.