manualshive.com logo in svg

Ruby Tech VC-400RT+, Manual, Page: 77 / 114

Share
Download
Ruby Tech VC-400RT+ Manual Download Page 77

VC-400RT

+

 Managed VDSL2 CPE Router MANUAL Ver. A5 

 

                                                               

                                                                                                     

76

 

Figure 4.10.2.1 Virtual Server Add 

 

The screen contains the following details: 

Fields in Virtual Server - Add: 

Field 

Description 

Application 
Name 

Specify Application name from dropdown or custom name for Virtual 

Server rule. 

Protocol 

Specify Virtual Server protocol - TCP or UDP or Both i.e. TCP/UDP. 

Private IP 

Specify Private IP address of Virtual Server rule. 

Remote IP 

Specify Remote IP address of Virtual Server rule. 

Public Port 
Range 

Specify Public Port range. 

Private Port 
Range 

Specify Private Port range. For single port, the start and end both are 

same. 

Enabled 

To enable the specified entry of the virtual server, tick on check box. 

WAN 
Interface 

Specify WAN interface on which the Virtual Server rule is configured. 

 

  Click Apply at any time during configuration to save the information that you 

have entered. 

  Click CANCEL to exit from this page without saving the changes. 

 

 

 

 

 

Summary of Contents for VC-400RT+



















































































































Reviews:

No comments