Ruby Tech VC-400RT+ Manual Download Page 42

Page: 42 / 114

VC-400RT

Managed VDSL2 CPE Router MANUAL Ver. A5

The last column named DEFAULT GATEWAY allows to select the WAN for relevant WAN mode

setting in WAN setting web page. When the user clicks any of the radio button, he will be asked to

confirm the same. If the user clicks

Apply

, the default gateway will be configured on the selected

WAN connection, otherwise the changes will not be applied.

The screen contains the following details:

Fields in WAN Settings:

Field

Description

Auto Detect Enable

To enable Auto Detect.

WAN Number

The configured WAN are referred through auto-assigned names in form

WANIP<No.> or WANPPP<No.> where <No.> start from 0.

WAN Channel

Provides information of layer-2 WAN channel configured.

Type

Provides information about type of WAN such as PPPoE or DHCP or

Bridged etc.

Default VoIP

Interface

This option is present in only IAD models, where VoIP is supported. this

is default interface for VoIP packets.

Default Gateway

This option allows to configure default route in system. The chosen

WAN will be used for default route.

When you click

Add

button in WAN Settings web page, a screen is displayed as shown in

Figure 4.6.5.2

Figure 4.6.5.2 WAN Settings – Apply – Step1

Summary of Contents for VC-400RT+



















































































































Search results

Summary of Contents for VC-400RT+

Reviews:

Ruby Tech VC-400RT+, Manual, Page: 42 / 114

Search results

Summary of Contents for VC-400RT+

Reviews: