VC-400RT
+
Managed VDSL2 CPE Router MANUAL Ver. A5
47
Fields in PPPoA WAN IPv6 Configuration:
Field
Description
Configuration Modes
This option allows to select following modes of IPv6 configuration:
Stateful DHCPv6(IA_NA and IA_PD)
SLAAC (Address Configuration) with DHCPv6 (IA_PD)
DUID Type
This option allows to configure different DUID (DHCP Unique Identifier)
types:
"Type-1: LLT (Link Layer Time)
"Type-2: EN (Enterprise Number)
"Type-3: LL (Link Layer)
IANA ID
IANA option represents IPv6 address and parameters related to the same
being accepted by DHCPv6 clients. IANA is the Identity Association for
Non- Temporary Addresses option. This Identifier to be configured when
Stateful DHCPv6 configuration mode is selected.
IAPD ID
IAPD options represent one or more IPv6 prefix and parameters related to
it. IAPD is the Identity Association for Prefix Delegation. This identifier to
be configured in both Stateful DHCPv6 or SLAAC+DHCPv6 configuration
modes.
SLA ID
This parameter is called Site Level Aggregation Identifier. This identifier is
used to configure the subnet for DHCPv6 client configuration.
Rapid-commit
This declaration enables DHCPv6-client to request the DHCPv-server to
perform a Rapid Commit. Handshaking will happen with two DHCPv6
messages.
Default WAN
This option allows to configure default route for relevant WAN mode of this
WAN connection.
Click
Apply
at any time during configuration to save the information that you have
entered.
Click
Cancel
to exit from this page without saving the changes.
4.6.5.5
Bridge
The option
Bridge
enables the bridge mode, which is a common connection method used for xDSL
modem. Select this option on WAN Settings page and click Next. A screen is displayed as shown in
Figure 4.6.5.7