manualshive.com logo in svg

Ruby Tech VC-400RT+, Manual, Page: 47 / 114

Share
Download
Ruby Tech VC-400RT+ Manual Download Page 47

VC-400RT

+

 Managed VDSL2 CPE Router MANUAL Ver. A5 

 

                                                               

                                                                                                     

46

 

Figure 4.6.5.6 WAN PPPoA creation

 

The screen contains the following details: 

 

Fields in PPPoA WAN: 

Field 

Description 

User Name 

To enter the username to be used in the PPPoA session. 

Password 

To enter the corresponding password for the specified username. 

Please retype your password  To enter the password again to reconfirm. 

MTU (1400-1500) 

To enter the maximum transfer unit of PPPoA frames in bytes. The 

MTU range is 1400 to 1500 bytes. 

Dial on Demand 

This feature allows to automatically re-connect to the service 

provider once the connection was lost. The checkbox can be 

enabled or disabled for this feature. 

Maximum Idle Time 

Specifies how long the connection may remain idle before the 

PPPoA connection gets automatically disconnected. The Idle 

Timeout is specified in seconds. 

Address Version 

For PPPoA, the only supported IP addressing is IPv4 currently. The 

IPv6 for PPPoA is not available in this version of VC-400RT+. 

 

Summary of Contents for VC-400RT+



















































































































Reviews:

No comments