VC-400RT
+
Managed VDSL2 CPE Router MANUAL Ver. A5
54
Figure 4.6.9.2 Test Failed
The screen contains the following details:
Fields in ADSL OAM F5 Test Page:
Field
Description
VPI/VCI
Displays the selected VPI/VCI channel of the OAM F5 Setting Table.
Cells Tx
Count of total number of transmitted ATM cells.
Cells Rx
Count of total number of received ATM cells.
Cells not Rx
Count of total number of not received ATM cells.
Max Resp Time
Displays the maximum response time in milliseconds.
Min Resp Time
Displays the minimum response time in milliseconds.
Avg Resp Time (milisecs) Displays the average response time in milliseconds.
4.7 Select “LAN”
When connecting the VC-400RT+ to a new control PC, one may want to go through the following
steps in order to make the IP address previously set by ifconfig in the console or on some later
occasion, one may want to change it again without using the console, then the menu below will be
helpful. In order to set the IP address, click on “LAN Settings”. You can view
LAN
in the left
navigation bar for LAN related settings.
Select the “LAN”. The menu below includes the sub-menus of
LAN ARP List
,
LAN Settings
and
UPnP Devices
. A screen is displayed as shown in Figure 4.7.
Figure 4.7 LAN options