VC-400RT
+
Managed VDSL2 CPE Router MANUAL Ver. A5
40
The screen contains the following details:
Fields in VLAN Creation:
Field
Description
VLAN Channel
Name
User specified VLAN Channel name.
Mode Name
List of L2 interfaces over which VLAN Channels can be configured.
VLAN Id
VLAN identifier in range of (7 - 4095). VLAN Identifiers(1 - 6) are
internally used in system for special purpose and are not available to
user for configuration.
Override MAC
Address
This is an option to configure MAC address by overriding physical MAC
address. In the current release, this option is not available to user for
configuration.
Click
Add
to save the information that you have entered.
Click
Cancel
to exit from this page without saving the changes.
4.6.5
WAN Setting
To configure the WAN interface, click the
WAN Setting
link (
WAN > WAN Setting
) on the left
navigation bar and a screen is displayed as shown in Figure 4.6.5.
Figure 4.6.5 WAN Setting - Auto Detect Enable
Figure 4.6.5.1 WAN Setting
The VC-400RT+ can support up to maximum 16 WAN connections in system. When a hardware
based QoS is enabled in system, it limits the number of VCCs to 8 only for ATM based WAN. For
creating a new WAN connection, click
Add
in the WAN setting page. Please follow the rest of the
steps for creating the WAN connection.