manualshive.com logo in svg

Ruby Tech VC-400RT+, Manual, Page: 43 / 114

Share
Download
Ruby Tech VC-400RT+ Manual Download Page 43

VC-400RT

+

 Managed VDSL2 CPE Router MANUAL Ver. A5 

 

                                                               

                                                                                                     

42

The screen contains the following details: 

Fields in WAN Settings – Apply – Step1: 

Field 

Description 

Attached Channel 

Select the WAN Channel (e.g. PVC) from drop-down, being configured 

as WAN. 

Dynamic IP Address 

To get your IP Address from your service provider (means VC-400RT+ 

is DHCP client on WAN) click 

Apply

. 

Static IP Address 

To enter the WAN interface IP Address of VC-400RT+ enable this field 

and click 

Apply

. 

PPPoE 

Point-to-Point Protocol over Ethernet used for connecting to the ISP, 

click

 Apply

. 

PPPoA 

Point-to-Point Protocol over ATM used for connecting to the ISP, click 

Apply

. This setting is applicable only for ATM WAN mode. 

Bridge 

To configure the WAN of bridged type, select this field and click 

Apply

. 

 Click 

Apply 

at any time during configuration to save the information that you have 

entered.  

 Click 

Cancel 

to exit from this page without saving the changes. 

4.6.5.1

 

Dynamic IP Address

 

 

To configure the WAN interface of DHCP IP type, select 

Dynamic IP Address 

option. A 

screen is displayed as shown in Figure 4.6.5.3 

 

Figure 4.6.5.3 Dynamic IP Address 

 

Please Enable IPv6 to set the WAN IPv6 Configuration. Select IPv6 Setting(

IPv6

 

> IPv6 

setting

) on the left navigation bar. 

 

 

 

Summary of Contents for VC-400RT+



















































































































Reviews:

No comments