VC-400RT
+
Managed VDSL2 CPE Router MANUAL Ver. A5
68
The screen contains the following details:
Fields in Packet Filtering:
Field
Description
IPV4/IPv6
Choose the appropriate tab to configure.
Enable Packet
Filter
To enable or disable the Packet Filter feature of VC-400RT+ CPE.
To enable, select the check box.
Source IP
Filter IP Address range of the local machine under VC-400RT+
CPE.
Source Port
Filter Port number range of the local machine under VC-400RT+
CPE.
Destination IP
IP address of the destination.
Destination Port
Port address of the destination.
Protocol
Filter protocol. (TCP or UDP).
Ingress Interface
Input interface of the packet.
Egress Interface
Output interface of the packet.
Source MAC
Address
Source MAC Address of packet originating host.
Enable
To provide more IP Addresses of the WAN interface.
Add
On pressing Add button, the screen shown in Figure 4.9.3.1 is
displayed for adding a new
packet filtering rule in system.
Delete All
To delete all the packet filtering rules configured in system.
Click Apply at any time during configuration to save the information that you
have entered.
Click CANCEL to exit from this page without saving the changes.
When you have chosen IPv4 tab, and click Add button in the Packet Filtering page, a screen
is displayed as shown
in Figure 104. If. you choose IPv6 tab and click on Add button, a screen is displayed as
shown in Figure 4.9.3.2.
Figure 4.9.3.1 Add a Packet Filtering Rule for Firewall - IPv4