VC-400RT
+
Managed VDSL2 CPE Router MANUAL Ver. A5
73
Click Apply for committing the App Server settings.
Click Cancel to exit from this page without saving the changes.
4.9.7 Access Control List (ACL)
To configure the access control list, click the
ACL
link (
Firewall > ACL
) on the left navigation bar.
This can be used for allowing specified IP addresses to access the VC-400RT+ CPE from WAN.
The system allows upto 16 ACL entries to be configured in the CPE device.A screen is displayed as
shown in Figure 4.9.7.
Figure 4.9.7 Application Server Settings
The screen contains the following details:
Fields in ACL Setting:
Field
Description
Enable ACL
To enable/disable ACL settings.
IP Address
If ACL is enabled, the IP addresses specified here are allowed to access
device.
Click Apply after filling the IP address for adding the entry in ACL list.
Click Cancel to exit from this page without saving the changes.
4.10 NAT
You can view the NAT on the left navigation bar of the VC-400RT+ CPE homepage. The
menu below includes the sub-menus of
NAT Settings
,
Virtual Server
,
PortTriggering
and
DMZ
. Following are the options available under NAT as shown in Figure 4.10