VC-400RT
+
Managed VDSL2 CPE Router MANUAL Ver. A5
45
Fields in PPPoE WAN (WAN IPv6 Configuration):
Field
Description
Configuration Modes
This option allows to select following modes of IPv6 configuration:
Stateful DHCPv6(IA_NA and IA_PD)
SLAAC (Address Configuration) with DHCPv6 (IA_PD)
DUID Type
This option allows to configure different DUID (DHCP Unique Identifier) types:
"Type-1: LLT (Link Layer Time)
"Type-2: EN (Enterprise Number)
"Type-3: LL (Link Layer)
IANA ID
IANA option represents IPv6 address and parameters related to the same being
accepted by DHCPv6 clients. IANA is the Identity Association for Non- Temporary
Addresses option. This Identifier to be configured when Stateful DHCPv6
configuration mode is selected.
IAPD ID
IAPD options represent one or more IPv6 prefix and parameters related to it. IAPD
is the Identity Association for Prefix Delegation. This identifier to be configured in
both Stateful DHCPv6 or SLAAC+DHCPv6 configuration modes.
SLA ID
This parameter is called Site Level Aggregation Identifier. This identifier is used to
configure the subnet for DHCPv6 client configuration.
Rapid-commit
This declaration enables DHCPv6-client to request the DHCPv-server to perform a
Rapid Commit. Handshaking will happen with two DHCPv6 messages.
Default WAN
This option allows to configure default route for relevant WAN mode of this WAN
connection.
Click
Apply
at any time during configuration to save the information that you have
entered.
Click
Cancel
to exit from this page without saving the changes.
4.6.5.4
PPPoA
The PPP-over-ATM (PPPoA) mode is valid
only for ATM based
WAN. To configure the
WAN interface to use PPPoA, select the option
PPPoA
option. A screen is displayed as
shown in Figure 4.6.5.6