VC-400RT
+
Managed VDSL2 CPE Router MANUAL Ver. A5
44
Click
Apply
at any time during configuration to save the information that you have
entered.
Click
Cancel
to exit from this page without saving the changes.
4.6.5.3
PPPoE
To configure the WAN interface to use PPPoE, choose the option
PPPoE
. A screen is
displayed as shown in Figure 4.6.5.5
Figure 4.6.5.5 WAN PPPoE creation
The screen contains the following details:
Fields in PPPoE WAN:
Field
Description
User Name
To enter a username for PPPoE session used for authentication in
B-RAS.
Password
To enter a password for PPPoE session used for authentication in
B-RAS.
Please retype your password
To enter the same password again to reconfirm.
Service Name
PPP Service Name (optional).
Access Concentrator Name
PPP Access concentrator Name (optional).
MTU (1400-1492)
To enter the maximum transfer unit size of PPPoE frames. The MTU
range is 1400 to 1492 bytes.
Relay LAN site PPPoE Session
This feature allows to enable/disable a PPPoE relay session.
PPP Option
Choose the option form the drop down list. The available options are,
Auto Connect, Dial-On-Demand and Manual Connect.
Address Version
This option allows configurability of IPv4 and/or IPv6 stack on per WAN
interface.