VC-400RT
+
Managed VDSL2 CPE Router MANUAL Ver. A5
70
The screen contains the following details:
Fields in “Add a Packet Filtering Rule - IPv6” page:
Field
Description
Ingress
Interface
To specify the input interface of the packet from dropdown options. (e.g.
WAN1).
Egress
Interface
To specify the output interface of the packet from dropdown options.
(e.g. WAN2).
Exclude
To exclude the selected option.
IP Version
Displays the IP version.
IP Source
Address
To specify the source IP address.
Protocol
To select the protocol. The options available are ALL, TCP, UDP, ICMP,
AH and ESP.
Source Port
To specify the range of the source port. Valid for protocols TCP or UDP
only.
Destination
Port
To specify the range of the destination port. Valid for protocols TCP or
UDP only.
Destination IP
Type
The destination IP can be a SINGLE address or a SUBNET or All
involving a range of IP
addresses.
Exclude
To exclude the selected option.
Target
The available options are Drop, Reject and Accept.
Enable this rule Enable/disable this rule.
Click Apply at any time during configuration to for adding the packet filtering
rule.
Click CANCEL to exit from this page without saving the changes.
4.9.4 URL Filtering
Using URL Filtering, the user can block the access to specific URLs to the web users by adding
them to the list in the URL Blocking web page. To configure the URL Filtering, click the
URL
Filtering
link (
Firewall > URL Filtering
) on the left navigation bar. A screen is displayed as shown
in Figure 4.9.4
Figure 4.9.4 URL Blocking