RTS DKP 16 CLD User Manual Download Page 38

Page: 38 / 232

28 Basic Operation

KP32CLD

Bosch Security Systems, Inc.

User Manual

F.01U.193.294

Rev. 10

INFO button (not available in Japanese Mode)

The

INFO

button is used to access commonly used features and configuration options for the KP 32 CLD. These include the

following:

TABLE 4.

INFO Button Feature and Option Descriptions

Graphical Representation

Feature

Description

Displays the port ID where the keypanel is located.

Lev 2

Displays the Level 2 key assignments on the keypanel.

Lstn

Displays the listen key assignments on the keypanel.

Name

Displays a list of current callers to the keypanel.

Type

Displays the assignment types of all the configured keypanel keys.

Mtx

Displays the Matrix system of each key assignment.

Tone

Opens the Tone Generator menu. For more information, see “Audio Options Menu, Tone Gen” on
page 91.

VRst

Opens the Key Volumes Reset menu. For more information, see “Press the SEL button. A blue arrow
appears next to the selected option.” on page 79.

Asgn

Displays all the other assignments on other keypanel pages not currently showing.

Test

Enables the Test Panel feature. For more information, see “Service Menu, Test Panel” on page 142.

Ver

Displays the firmware version currently loaded on the KP 32 CLD. For more information, see “Display
Menu, Version” on page 101.

INFO



Button

Summary of Contents for DKP 16 CLD









































































































































































































































Search results

Summary of Contents for DKP 16 CLD

Reviews:

Related manuals for DKP 16 CLD

Brands by name

Popular brands

RTS DKP 16 CLD, User Manual

Search results

Summary of Contents for DKP 16 CLD

Reviews:

Related manuals for DKP 16 CLD

Brands by name

Popular brands