RTS DKP 16 CLD, User Manual

Page: 49 / 232

KP32CLD Basic Operation 39
Bosch Security Systems, Inc. User Manual F.01U.193.294 Rev. 10
To answer a call on the graphical CWW , do the following:
1.
Press down on key 16 .

The talk indicator bar appears on the key display and the assignment becomes visible on key 16 .
2.
Start talking to the caller .

The highlight in the CWW list turns green when talking with the caller .
3.
Press up on key 16 .

The call is ended. The background of the caller in the CWW list turns a light gray (if not highlighted) .
To scroll the CWW list , do the following:
>
When the CWW list is visible, press the arrow up , or the arrow down button.

The highlight moves through the scroll list .
Clearing the CWW List
To clear the CWW list , do the following:
1.
If the CWW is not visible, press the CWW key to make it visible and the call selected.
2.
Press up on the CWW key once to remove the selected call.
3.
Repeat step 2 , as necessary.
Mute the Microphone/Speaker
Depending on the source selected, shown in the display window, when the Mic Mute switch is pressed UP, the corresponding
feature is muted (shown with a mute icon overlaid on the feature icon). For CWW key location, see “Reference View - KP
32 CLD” on page 6.
NOTE: Figure 15 is a representation of what the mute icon looks like in the display. All muted icons cannot be seen as
shown in Figure 20. See Table 6 on page 40 for information on when the various display icons appear relative to
the configuration options specified.
NOTE: A flashing mute icon appears on any active mics when the mic mute key is pressed. If tone is enabled, which
disables mics, the mute icon appears on any active mic, but does not flash.
FIGURE 15.
All Muted Display Icons