RTS DKP 16 CLD, User Manual

Page: 88 / 232

78 KP 32 CLD Menu System KP32CLD
Bosch Security Systems, Inc. User Manual F.01U.193.294 Rev. 10
Audio Options Menu, Headset Spkr
The Headset Spkr menu option is used to control the headset detection functions: auto-transfer, which is used to detect if a
headset is present and mode, which determines when and where audio is heard.
NOTE: When a GPI 32 CLD option card is installed, Front and Rear options are displayed.
Available selections for this menu are:
Disabled
Enabled When enabled, the audio is routed to the headset speaker.
Available selections for the mode menu are:
Always ON (default) No matter what is selected, Always ON overrides the manual selection.
Disabled
Switched When enabled, the mic that is selected, the corresponding speaker/headphone is active.
NOTE:
•
Where the audio is heard is directly related to the state of the Hdst - Panel Mic. See “Reference View -
KP 32 CLD” on page 6.
•
When using the DKP 16 CLD, Left and Right appear as options, instead of Front and Rear .
To configure the Headset Spkr mode , do the following:
1.
On the KP 32 CLD keypad, press MENU .

The Top Level menu appears .
2.
Using the 3(

) or 6(

), select Audio Options .
3.
Press the SEL button.

The Audio Options menu appears .
4.
Using the 3(

) or 6(

), select Headset .
5.
Press the SEL button.

Front and Rear appear .
6.
Using the 3(

) or 6(

), select either Front or Rear .
7.
Press the SEL button.

Auto-Transfer and Mode appear.